AHC Single Air Inlet
AHC-S Double Air Inlet
a. Crossflow cooling mode is adopted, and the bleaching rate is very low;
b. The internal space of closed circular cross flow cooling tower is large and the maintenance is very convenient;
c. Totally closed circulation to eliminate the blockage caused by sundries;
d. The heat exchanger adopts the stacking mode of building blocks, which can be installed and disassembled layer by layer;
e. Using hot water circulation, no scale formation;
f. It does not need a pool, occupies a small area, and is easy to locate.
The closed circular cross flow cooling tower fan adopts a silent large blade fan, which makes the noise at the outlet of the cooling tower lower. The gravity pool type water distribution is adopted. The spray water enters into the basin and then passes through the nozzle under the action of gravity. The heat exchange filler under the spray and the heat exchanger of the closed cooling tower. After passing through the heat exchanger, it naturally flows into the bottom sump. Therefore, the noise of a closed circular cross flow cooling tower is lower than that of a closed counter flow cooling tower. There was no sound of water dripping into the pan. Compared with the counter flow cooling tower, the closed circular cross flow cooling tower can be assembled side by side, which has a smaller floor area. Therefore, the cross-flow closed cooling tower is more suitable for occasions with high noise requirements and a small floor area.