Description Of Cooling Tower Filling For Kingsun

Material:PVC

Adaptive Temperature:-20℃-60℃

Standard:305mm*1220mm;305mm*1525mm;305mm*1860mm;305mm*2440mm

Thickness:0.27mm

Gap:13mm

Product Description: counter flow tower, only adhesive, positive angle. It is suitable for the renovation of cooling towers of Kingsun, Mingxin and Xinling brands. The filling can promote the turbulent mixing of air and water and enhance the heat transfer. The special chute design of the filling can withstand high water load without causing extra high pressure drop.

Parameter Of Cooling Tower Filling For Kingsun

Module Length (Max)	mm	3000
Module Width	mm	730/750/930/950
Module Depth	mm	—
Flute Height	mm	20
Flute Corrugation Angle	degrees	－
Surface Area	m²/m³	142
Sheet Thickness - Before Forming	mm	0.32
Sheet Thickness - After Forming	mm	0.28
Max. application temp. (short time) - PVC	°C	60
Max.operating temp. (short time) - High temp.	°C	80

Structure & Installation Drawing Of Cooling Tower Filling For Kingsun

Structure & Installation Drawing

Advantages Of Cooling Tower Filling For Kingsun

A.Kingsun filling adopts original PVC plastic, and its quality meets the technical requirements of DL / t742-2001.

B.Kingsun filling has the basic performance of good thermal characteristics and low ventilation resistance.

C.It does not soften and deform at 50 ℃.

D.Under the condition of design temperature, it is not broken and brittle.

E.The filling has good assembly rigidity, strong bearing capacity, no deformation and distortion, no loose lodging under normal operation and service conditions, and can maintain stable and efficient operation all year round. Its service life is no less than 5 years.

F. It has good flame retardancy.