Send US an Email
Cooling Tower Filling For Liangchi

Cooling Tower Filling For Liangchi

Cooling Tower Filling For Liangchi

Description Of Cooling Tower Filling For Liangchi

Material:PVC

 

Adaptive temperature:-20℃-60℃

 

Size:750mm*800mm;750mm*400mm

 

Thickness:0.27mm

 

Gap:20mm

The raw materials of Liangchi filling are high-grade CPVC or PVC hard adhesive, which has good toughness, no white line bending and aging resistance. It is formed by vacuum suction molding, and has high bulk mass coefficient, and can provide the largest water gas heat exchange area with small static pressure.


Parameter Of Cooling Tower Filling For Liangchi

Module Length (Max)

mm

2000

Module Width

mm

750/1000

Module Depth

mm

Flute Height

mm

20

Flute Corrugation Angle

degrees

Surface Area

m2/m3

147

Sheet Thickness - Before Forming

mm

0.32

Sheet Thickness - After  Forming

mm

0.28

Max. application temp. (short time) - PVC

°C

60

Max.operating temp. (short time) - High temp.

°C

80


Structure & Installation Drawing Of Cooling Tower Filling For Liangchi

Structure & Installation Drawing

Bonding And Installation Of Cooling Tower Filling For Liangchi

A.The filling on the market is flake, but the flake filling can not be directly put into the cooling tower. After getting the filling, the first thing is to measure whether the size of the filling is consistent with the size of the product we need, because the size requirements of different cooling towers are different. After ensuring the correct size, we can move on to the next step. The next step we need to do is to use the cooling tower packaging adhesive paste sheet packaging.

 

B.When pasting, the glue should be evenly applied on the package, so that it can be painted one by one and pasted one by one. We should make sure that every piece of packaging is firmly pasted together to prevent non stick phenomenon in the process of use. After the package is pasted, it will form one package block after another. The next step we need to do is to put these filling blocks neatly in the cooling tower.

 

C. Due to the particularity of the filling of the good opportunity cooling tower, when we install the filling, we should operate according to the above steps and pay attention to the operation method.


Start Now
Email us with any questions or inquiries about cooling tower unit. We would be happy to answer your questions.
Zhejiang Aoshuai Refrigeration Co., Ltd.
we chat