Name: Cooling Tower Air Inlet Louver For Mesan
Brand: Zhejiang Aoshuai Refrigeration Co., Ltd.

Cooling Tower Air Inlet Louver For Mesan

Cooling Tower Louvers

Air intake shutters prevent sunlight from entering the cooling tower water basin. Installing air intake shutters helps control algae growth. Controlling light and limiting algae growth means lower chemical costs. Air intake shutters also help reduce the amount of water spilled from the cooling tower. This reduces the amount of water and chemicals needed to run your cooling tower efficiently. In addition, you will experience easier access to and from the water basin. Without proper care and maintenance, intake shutters on counterflow cooling towers can sometimes scale. If this happens, it can reduce the efficiency of the cooling tower. Fouled shutters reduce the flow of air to the unit, which reduces efficiency.

Key Benefits

- Prevents objects such as leaves from being drawn into the tower from the surroundings.

- Eliminates splashing of the water tray.

- Smoothes incoming airflow.

- Masks the water in the water tray, thus inhibiting the possible growth of algae or other microorganisms.

Features Of Cooling Tower Air Inlet Louver For Mesan

Most of the air inlet of the cooling tower is installed with louvers. But blinds are prone to splash. The new air inlet window of cooling tower is made of high PVC sheet and bonded. The surrounding frame can be made of galvanized steel or stainless steel. After the air in the air inlet enters the air inlet window, it needs to change the direction to enter the cooling tower, so there is no splash problem.

Details Of Cooling Tower Air Inlet Louver For Mesan

Material：PVC

Thickness:6mm-8mm

Aperture:14mm

Standard film:1.6m*1m(Customize)

Honeycomb design, scientific and reasonable, reduce mosquitoes, increase the air feed area.

Production Workshop Of Cooling Tower Air Inlet Louver For Mesan

Parameter Of Cooling Tower Air Inlet Louver For Mesan

Module Length (Max)	mm	2440
Module Width (Max)	mm	600
Module Thickness	mm	65
Flute Height	mm	25
Sheet Thickness - Before Forming	mm	0.45
Sheet Thickness - After Forming	mm	0.35
Max. application temp. (short time) - PVC	°C	60